Matches on the start of a HTTP request or response.
Uses a buffer constructed from the request line and normalized request
headers, including the Cookie header.
Or for the response side, it uses the response line plus the
normalized response headers, including the Set-Cookie header.
Both buffers are terminated by an extra \r\n.
A sticky buffer that allows content inspection on a contructed buffer
of HTTP header names. The buffer starts with \r\n, the names are
separated by \r\n and the end of the buffer contains an extra \r\n.
E.g. \r\nHost\r\nUser-Agent\r\n\r\n
The leading \r\n is to make sure one can match on a full name in all
cases.
Due to the use of AFL_LOOP and initialization/deinit outside of it,
part of the fuzzing relied on the global 'state' in flow and defrag.
Because of this crashes that were found could not be reproduced. The
saved crash input was only the last in the series.
This patch addresses that. It requires a new output directory 'dump'
where the packet fuzzers will store all their input. If the AFL_LOOP
fails the files will not be removed and this 'serie' can be read
again for reproducing the issue.
e.g.: AFL would work with:
--afl-decoder-ppp=@@
and after a crash is found the produced serie can be read with:
--afl-decoder-ppp-serie=1486656919-514163
The series have a timestamp as name and a suffix that controls the
order in which the files will be 'replayed' in Suricata.
Luajit has a strange memory requirement, it's 'states' need to be in the
first 2G of the process' memory.
This patch improves the pool approach by moving it to the front of the
start up.
A new config option 'luajit.states' is added to control how many states
are preallocated. It defaults to 128.
Add a warning when more states are used then preallocated. This may fail
if flow/stream/detect engines use a lot of memory. Add hint at exit that
gives the max states in use if it's higher than the default.
Some code won't work well when the OS doesn't allow RWX pages. This
page introduces a check for runtime evaluation of the OS' policy on
this.
Thanks to Shawn Webb from HardenedBSD for suggesting this solution.
Add support for the ENIP/CIP Industrial protocol
This is an app layer implementation which uses the "enip" protocol
and "cip_service" and "enip_command" keywords
Implements AFL entry points
Move engine and registration into the keyword file.
Register as 'ALPROTO_UNKNOWN' instead of per alproto. The
registration will only apply it to those rules that have
events set.
Introduce prefilter keyword to force a keyword to be used as prefilter.
e.g.
alert tcp any any -> any any (content:"A"; flags:R; prefilter; sid:1;)
alert tcp any any -> any any (content:"A"; flags:R; sid:2;)
alert tcp any any -> any any (content:"A"; dsize:1; prefilter; sid:3;)
alert tcp any any -> any any (content:"A"; dsize:1; sid:4;)
In sid 2 and 4 the content keyword is used in the MPM engine.
In sid 1 and 3 the flags and dsize keywords will be used.
In preparation of the introduction of more general purpose prefilter
engines, rename PatternMatcherQueue to PrefilterRuleStore. The new
engines will fill this structure a similar way to the current mpm
prefilters.
This adds a new keyword which permits to call the
bypass callback when a sig is matched.
The callback must be called when the match of the sig
is complete.
Detection plugin for TLS certificate fields notBefore and notAfter.
Supports equal to, less than, greater than, and range operations
for both keywords. Dates can be represented as either ISO 8601 or
epoch (Unix time).
Examples:
alert tls [...] tls_cert_notafter:1445852105; [...]
alert tls [...] tls_cert_notbefore:<2015-10-22T23:59:59; [...]
alert tls [...] tls_cert_notbefore:>2015-10-22; [...]
alert tls [...] tls_cert_notafter:2000-10-22<>2020-05-15; [...]
Moved and adapted code from detect-filemd5 to util-detect-file-hash,
generalised code to work with SHA-1 and SHA-256 and added necessary
flags and other constants.
Add a new API to store data from streaming sources, like HTTP body
processing or TCP data.
Currently most of the code uses a pattern of list of data chunks
(e.g. TcpSegment) that is reassembled into a large buffer on-demand.
The Streaming Buffer API changes the logic to store the data in
reassembled form from the start, with the segments/chunks pointing
to the reassembled data.
The main buffer storing the data slides forward, automatically or
manually. The *NoTrack calls allows for a segmentless mode of
operation.
This approach has two main advantages:
1. accessing the reassembled data is virtually cost-free
2. reduction of allocations and memory management
Initial version of the 'FlowWorker' thread module. This module
combines Flow handling, TCP handling, App layer handling and
Detection in a single module. It does all flow related processing
under a single flow lock.
Match on server name indication (SNI) extension in TLS using tls_sni
keyword, e.g:
alert tls any any -> any any (msg:"SNI test"; tls_sni;
content:"example.com"; sid:12345;)
Dump a json record containing all sigs that need to be inspected after
prefilter. Part of profiling. Only dump if threshold is met, which is
currently set by:
--set detect.profiling.inspect-logging-threshold=200
A file called packet_inspected_rules.json is created in the default
log dir.
Per rule group tracking of checks, use of lists, mpm matches,
post filter counts.
Logs SGH id so it can be compared with the rule_group.json output.
Implemented both in a human readable text format and a JSON format.
Support TLS in Lua detection scripts.
function init (args)
local needs = {}
needs["tls"] = tostring(true)
return needs
end
function match(args)
version, subject, issuer, fingerprint = TlsGetCertInfo();
if version == nil then
return 0
end
str = string.format("Version %s\nIssuer %s\nSubject %s\nFingerprint %s",
version, issuer, subject, fingerprint)
SCLogInfo(str);
return 1
end
Remove most of the CFLAGS updates from configure. Flags are now (mostly)
set in AM_CLFLAGS.
Update all -DBLAH additions to CFLAGS to use AC_DEFINE([BLAH], ...)
Improve Lua vs LuaJIT checking.
Improve the configure output a bit.
Lots of smaller cleanups.
An design error was made when doing the TLS storage module which
has been made dependant of the TLS logging. At the time there was
only one TLS logging module but there is now two different ones.
By putting the TLS store module in a separate module, we can now
use EVE output and TLS store at the same time.
Implement LINKTYPE_NULL for pcap live and pcap file.
From: http://www.tcpdump.org/linktypes.html
"BSD loopback encapsulation; the link layer header is a 4-byte field,
in host byte order, containing a PF_ value from socket.h for the
network-layer protocol of the packet.
Note that ``host byte order'' is the byte order of the machine on
which the packets are captured, and the PF_ values are for the OS
of the machine on which the packets are captured; if a live capture
is being done, ``host byte order'' is the byte order of the machine
capturing the packets, and the PF_ values are those of the OS of
the machine capturing the packets, but if a ``savefile'' is being
read, the byte order and PF_ values are not necessarily those of
the machine reading the capture file."
Feature ticket #1445
- Created app-layer-htp-xff.c and app-layer-htp-xff.h
- Added entries in the Makefile.am
- Added the necessary configuration options to EVE alert section
- Updated Unified2 XFF configuration comments and removed unnecessary whitespace
- Created a generic function to parse the configuration
- Release the flow locks sooner and remove debug logging
- Added XFF support to EVE alert output
Convert regular 'stats.log' output to this new API.
In addition to the current stats value, also give the last value. This
makes it easy to display the difference.
Add the modbus.function and subfunction) keywords for public function match in rules (Modbus layer).
Matching based on code function, and if necessary, sub-function code
or based on category (assigned, unassigned, public, user or reserved)
and negation is permitted.
Add the modbus.access keyword for read/write Modbus function match in rules (Modbus layer).
Matching based on access type (read or write),
and/or function type (discretes, coils, input or holding)
and, if necessary, read or write address access,
and, if necessary, value to write.
For address and value matching, "<", ">" and "<>" is permitted.
Based on TLS source code and file size source code (address and value matching).
Signed-off-by: David DIALLO <diallo@et.esia.fr>
Decode Modbus request and response messages, and extracts
MODBUS Application Protocol header and the code function.
In case of read/write function, extracts message contents
(read/write address, quantity, count, data to write).
Links request and response messages in a transaction according to
Transaction Identifier (transaction management based on DNS source code).
MODBUS Messaging on TCP/IP Implementation Guide V1.0b
(http://www.modbus.org/docs/Modbus_Messaging_Implementation_Guide_V1_0b.pdf)
MODBUS Application Protocol Specification V1.1b3
(http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b3.pdf)
Based on DNS source code.
Signed-off-by: David DIALLO <diallo@et.esia.fr>
This patch adds a new Log API for streaming data such as TCP reassembled
data and HTTP body data. It could also replace Filedata API.
Each time a new chunk of data is available, the callback will be called.
EVE logging is a really good substitute for pcapinfo. Suriwire is
now supporting EVE output so it is not anymore necessary to have
pcapinfo in Suricata.
Remove local copies from each MPM file and use include file instead.
Might be better to also add util-memcpy.c rather than inlining it each time,
to get smaller code, since only seems to be used at initialization.
When running on a TILEncore-Gx PCIe card, setting the filetype of fast.log
to pcie, will open a connection over PCIe to a host application caleld
tile-pcie-logd, that receives the alert strings and writes them to a file
on the host. The file name to open is also passed over the PCIe link.
This allows running Suricata on the TILEncore-Gx PCIe card, but have the
alerts logged to the host system's file system efficiently. The PCIe API that
is used is the Tilera Packet Queue (PQ) API which can access PCIe from User
Space, thus avoiding system calls.
Created util-logopenfile-tile.c and util-logopen-tile.h for the TILE
specific PCIe logging functionality.
Using Write() and Close() function pointers in LogFileCtx, which
default to standard write and close for files and sockets, but are
changed to PCIe write and close functions when a PCIe channel is
openned for logging.
Moved Logging contex out of tm-modules.h into util-logopenfile.h,
where it makes more sense. This required including util-logopenfile.h
into a couple of alert-*.c files, which previously were getting the
definitions from tm-modules.h.
The source and Makefile for tile-pcie-logd are added in contrib/tile-pcie-logd.
By default, the file name for fast.log specified in suricata.yaml is used as
the filename on the host. An optional argument to tile-pcie-logd, --prefix=,
can be added to prepend the supplied file path. For example, is the file
in suricata.yaml is specified as "/var/log/fast.log" and --prefix="/tmp",
then the file will be written to "/tmp/var/log/fast.log".
Check for TILERA_ROOT environment variable before building tile_pcie_logd
Building tile_pcie_logd on x86 requires the Tilera MDE for its PCIe libraries
and API header files. Configure now checs for TILERA_ROOT before enabling
builing tile_pcie_logd in contrib/tile_pcie_logd
- restore json output-file.[ch] as output-json-file.[ch] after rebase conflict
- fix Makefile.am after merge conflict
- some dev-log-api-v4.0 rebase json fallout cleanup
Victor Julien
Jason Ish
kwong
Giuseppe Longo
Mats Klepsland
Duarte Silva
tobiass1
Justin Viiret
Eric Leblond
Tom DeCanio
Giuseppe Longo
gureedo
Ken Steele
DIALLO David
David Abarbanel
Jason Ish