Add the `pgsql.query` rule keyword to match on PGSQL's query
request message contents. This currently matches on the EVE field:
pgsql.request.simple_query
`pgsql.query` is a sticky buffer and can be used as a fast_pattern.
Task #6259
This is required for crates that use a C compiler to use the same one as
used by Suricata. Important for cross compiling.
Also pass AR and RANLIB which are often used for cross compiling.
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
Websocket parser creates a new PDU per transaction in each direction. Appropriate
calls to trigger raw stream inspection have been added on succesful parsing of
each PDU.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
SSH parser creates a new record per request or response. Appropriate calls
to trigger raw stream inspection have been added on succesful parsing of
each request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
SIP parser creates a new transaction per request or response. Appropriate calls
to trigger raw stream inspection have been added on creation of each request and
response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
RFB has several different types of requests and responses. Appropriate calls
to trigger raw stream inspection have been added on completion of each type of
request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
RDP parser creates a transaction per request or response. Appropriate calls
to trigger raw stream inspection have been added on completion of each request
and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
POP3 has a classic request response model where a request is mapped to
a response although not by any ID. Appropriate calls to trigger raw stream
inspection have been added on completion of each request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
NFS has a classic request response model where each request is mapped to
a corresponding response. Additionally, there's also file tracking and
handling done as a part of these transactions. Appropriate calls to
trigger raw stream inspection have been added on completion of each
request and response.
Task 7026
Bug 7004
The functions around TriggerRawStreamReassembly are misnomers in the
current layout of the code. The functions were named appropriately when
they were created as per the structural and logical layout of the code
at the time.
These functions in today's code are being used to track, update and
trigger progress of inspection in the raw stream only. Hence, rename them
to TriggerRawStreamInspection.
Issue: 7507
Implement the ftp.completion_code sticky buffer. Multi-buffer as an FTP
command can produce multiple responses.
E.g., with the FTP command RETR
RETR temp.txt
150 Opening BINARY mode data connection for temp.txt (1164 bytes).
226 Transfer complete.
sawp crate has its own Direction enum as follows.
pub enum Direction {
ToClient = 0,
ToServer = 1,
Unknown = 2,
}
While it is correct to send this Direction enum as argument to the
sawp_pop3 parser as it expects, it is not correct to use it where the
direction param is obtained from the internal API of Suricata.
The reason is that Suricata's definition of its Direction enum is as
follows.
pub enum Direction {
ToServer = 0x04,
ToClient = 0x08,
}
This can lead to issues like incorrect progress tracking of a transaction in
a direction which could cause inspection on incorrect data and buggy behavior.
Issue: 7506
Add a (non-sticky buffer) keyword for ftp.reply_received. This is not a
sticky buffer as the keyword relates to protocol state and not bytes
from the actual protocol exchange.
ftp.reply_received: yes|on|no|off
Introduce DetectGetSingleData which does the generic wrapping,
including the transforms, using a new callback prototype
DetectTxGetBufferPtr
The goal is to replace most InspectionBufferGetDataPtr.
For this commit, we do not change every callback to keep the
change relatively small.
Focus here is to remove DetectHelperGetData as its functionality is
provided more directly by the new DetectTxGetBufferPtr.
Ticket: 6695
"server_handshake" which logs the following:
1. TLS version used during handshake
2. The chosen cipher suite, excluding GREASE
3. TLS extensions, excluding GREASE
Ticket: 6695
Add new custom log fields:
"client_handshake" which logs the following:
1. TLS version used during handshake
2. TLS extensions, excluding GREASE, SNI and ALPN
3. All cipher suites, excluding GREASE
4. All signature algorithms, excluding GREASE
The use-case is for logging TLS handshake parameters in order to survey
them, and so that JA4 hashes can be computed offline (in the case that
they're not already computed for the purposes of rule matching).
This commit is designed in preparation of enabling the handshake object
to log it's own contents rather than being done on the C side.
Moving the tls versions functionality to rust has a couple of uses:
1. Allows both rust and C side to use these fields
2. Moves more of the tls related logic to rust
3. C side can still use these values because of cbindgen
Ticket: 6695
With the introduction of the HandshakeParams object we're able to
utilise the theory further by using it as the object to track the ALPNs.
The HandshakeParams object is now responsible for holding all ALPNS. The
user of this HandshakeParams object i.e. JA4, can use whichever fields
are needed. So only when we generate a JA4 hash do we use the first ALPN
and require to format it. Other users of HandshakeParams may opt to use
all ALPN's i.e. during TlsAlpnGetData().
Ticket: 6695
This introduction splits the use of the handshake parameters into their
own object, HandshakeParams, which is populated by the TLS decoder. The
JA4 object is now very simple. It's a simple String object (the JA4
Hash) which is generated during new().
This introduction is part of a larger idea, which is to enable
outputting these raw parameters without JA3/JA4. These handshake
parameters are the components used to generate the JA4 hash, thus it
makes sense for it to be a user of HandshakeParams.
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
MQTT creates a transaction per message per direction, so, a call to
trigger raw stream reassembly has been made on completion of each
transaction in the respective direction.
Optimization 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
Modbus has a classic request response model, so, a call to trigger raw
stream reassembly is added on completion of each request and response.
Optimization 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
LDAP can have multiple responses corresponding to a request. The call to
trigger raw stream reassembly has been added on common call sites that
see the completion of a request or any of the responses.
Optimization 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
KRB5 creates a transaction based on how each input is parsed. It could
be parsed as a request or response but that is the concern of the
parser. The call to trigger raw stream reassembly has been added after
successful parsing of the respective request/response.
Optimization 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
HTTP2 has a classic request response model, so, a call to trigger raw
stream reassembly is added on completion of each request and response.
HTTP2 parser has its own maximum reassembly setting. The call has been
added irrespective of this setting as it is prudent to make all data so
far available for inspection if maximum was reached until the maximum.
Optimization 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream reassembly which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
ENIP has a classic request response model, so, a call to trigger raw
stream reassembly is added on completion of each request and response.
Optimization 7026
Bug 7004
Transforms that support optional strings, like from_base64 and
pcrexform, should also support identity-strings to treat transforms with
like transform options as the same.
This commit adds transform identity data handling:
- When computing a hash, include identity data from the transform
- When comparing, include the identity data from the transforms
- Omitting the "options" ptr from the transform hash/compare
- Modify xor, pcrexform and from_base64 to supply identification data for
disambiguation in the compare/hash logic.
If a password message was seen while logging passwords was disabled
for pgsql, this would lead to an empty request being logged.
Instead of simply not logging anything when there is a password message
and this is disabled, however, log instead that said password is
redacted.
Bug #7647
Ticket: 7667
And prefix SCDetectBufferSetActiveList to be exported
Allows less use of suricata crate in plugin as we get the functions
prototypes from suricata_sys and they are more correct.
Ticket: 7285
As this is the default for websocket, which is bigger than the
defaut for zlib usage
Also limit the decompressed content to the max-payload-size
configuration parameter also used for non-compressed content.
And also use a stateful decoder to store/remember the compression
state to be able to decompress later messages.
move flate2.rs to a backend supporting the setting
of window_bits, which is not the case for miniz-oxide.
This will allow WebSocket to use Sec-WebSocket-Extensions
which can set a non-default window_bits
email.received matches on MIME EMAIL Received
This keyword maps to the EVE field email.received[]
It is a sticky buffer
Supports multiple buffer matching
Supports prefiltering
Ticket: #7599
email.url matches on URLs extracted from an email
This keyword maps to the EVE field email.url[]
Supports multiple buffer matching
Supports prefiltering
Ticket: #7597
Remove the authors field as it is deprecated.
Update the repository page to the Suricata repository.
Remove the homepage, it can be found via the reposistory page.
As the "suricata" crate depends on htp, we need to publish htp to
crates.io first, however "htp" name is already taken. So rename "htp" to
"suricata-htp".
On a normal project where the Cargo.lock is checked in, it would be
normal to see an updated Cargo.lock in git status and the like. As we
use autoconf to generate this file, we should just copy it back to the
input file so we get the same convenience of seeing when it is
updated, which usually means it needs to be checked in.
However, to satisfy "make distcheck", only copy it if the input
template exists, if the input template does not exist we are in an out
of tree build.
ldap.responses.attribute_type matches on LDAP attribute type/description
This keyword maps the eve field ldap.responses[].search_result_entry.attributes[].type
It is a sticky buffer
Supports multiple buffer matching
Supports prefiltering
Ticket: #7533
ldap.request.attribute_type matches on LDAP attribute type/description
This keyword maps the following eve fields:
ldap.request.search_request.attributes[]
ldap.request.modify_request.changes[].modification.attribute_type
ldap.request.add_request.attributes[].name
ldap.request.compare_request.attribute_value_assertion.description
It is a sticky buffer
Supports multiple buffer matching
Supports prefiltering
Ticket: #7533
Move handling of FTP responses to Rust to improve support for FTP
keyword matching. Parsing the response line when encountered
simplifies multi-buffer matching and metadata output.
Issue: 4082
This module uses the sawp-pop3 crate to parse POP3 requests and responses
Features:
- eve logging
- events for parsable but non-RFC-compliant messages
Ticket: 3243
Config:
Firewall rules are like normal rule, with some key differences.
They are loaded separate, and first, from:
```yaml
firewall-rule-path: /etc/suricata/firewall/
firewall-rule-files:
- fw.rules
```
Can also be loaded with --firewall-rules-exclusive: Mostly for QA purposes.
Allow -S with --firewall-rules-exclusive, so that firewall and threat detection
rules can be tested together.
Rules:
Differences with regular "threat detection" rules:
1. these rules are evaluated before threat detection rules
2. these rules are evaluated in the order as they appear in the rule file
3. currently only rules specifying an explicit hook at supported
a. as a consequence, no rules will be treated as (like) IP-only, PD-only or
DE-only
Require explicit action scope for firewall rules. Default policy is
drop for the firewall tables.
Actions:
New action "accept" is added to allow traffic in the filter tables.
New scope "accept:tx" is added to allow accepting a transaction.
Tables:
Rulesets are per table.
Table processing order: `packet:filter` -> `packet:td` -> `app:*:*` -> `app:td`.
Each of the tables has some unique properties:
`packet:filter`:
- default policy is `drop:packet`
- rules are process in order
- action scopes are explicit
- `drop` or `accept` is immediate
- `accept:hook` continues to `packet:td`
`packet:td`:
- default policy is `accept:hook`
- rules are ordered by IDS/IPS ordering logic
- action scopes are implicit
- actions are queued
- continues to `app:*:*` or `alert/action finalize`
`app:*:*`:
- default policy is `drop:flow`
- rules are process in order
- action scopes are explicit
- `drop` is immediate
- `accept` is conditional on possible `drop` from `packet:td`
- `accept:hook` continues to `app:td`, `accept:packet` or `accept:flow`
continues to `alert/action finalize`
`app:td`:
- default policy is `accept:hook`
- rules are ordered by IDS/IPS ordering logic
- action scopes are implicit
- actions are queued
- continues to `alert/action finalize`
Implementation:
During sigorder, split into packet:filter, app:*:* and general td.
Allow fw rules to work when in pass:flow mode. When firewall mode is enabled,
`pass:flow` will not skip the detection engine anymore, but instead
process the firewall rules and then apply the pass before inspecting threat
detect rules.
If we see a space-like character that is not space 0x20 in uri,
we set this event, even it the request line finished with a normal
space and protocol
Fixes: 9c324b796e ("http: Use libhtp-rs.)
Ticket: 5053
Move enum OutputJsonLogDirection and struct
EveJsonTxLoggerRegistrationData to a public header user by rust
thanks to bindgen
Rename to use SC prefix on the way
And make EveJsonSimpleTxLogFunc use a const pointer to transaction
suricata.yaml output section for smb now parses a types list
and will restrict logging of transactions to these types.
By default, everything still gets logged
Remove unused rs_smb_log_json_request on the way
Ticket: 7620
This sub-protocol inspects messages exchanged between postgresql backend
and frontend after a 'COPY TO STDOUT' has been processed.
Parses new messages:
- CopyOutResponse -- initiates copy-out mode/sub-protocol
- CopyData -- data transfer messages
- CopyDone -- signals that no more CopyData messages will be seen from
the sender for the current transaction
Task #4854
warning: using `contains()` instead of `iter().any()` is more efficient
--> src/http2/http2.rs:267:20
|
267 | if block.value.iter().any(|&x| x == b'@') {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `block.value.contains(&b'@')`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_contains
= note: `#[warn(clippy::manual_contains)]` on by default
warning: extern declarations without an explicit ABI are deprecated
--> src/core.rs:72:1
|
72 | extern {
| ^^^^^^ help: explicitly specify the "C" ABI: `extern "C"`
|
= note: `#[warn(missing_abi)]` on by default
Ticket: #2696
There are a lot of changes here, which are described below.
In general these changes are renaming constants to conform to the
libhtp-rs versions (which are generated by cbindgen); making all htp
types opaque and changing struct->member references to
htp_struct_member() function calls; and a handful of changes to offload
functionality onto libhtp-rs from suricata, such as URI normalization
and transaction cleanup.
Functions introduced to handle opaque htp_tx_t:
- tx->parsed_uri => htp_tx_parsed_uri(tx)
- tx->parsed_uri->path => htp_uri_path(htp_tx_parsed_uri(tx)
- tx->parsed_uri->hostname => htp_uri_hostname(htp_tx_parsed_uri(tx))
- htp_tx_get_user_data() => htp_tx_user_data(tx)
- htp_tx_is_http_2_upgrade(tx) convenience function introduced to detect response status 101
and “Upgrade: h2c" header.
Functions introduced to handle opaque htp_tx_data_t:
- d->len => htp_tx_data_len()
- d->data => htp_tx_data_data()
- htp_tx_data_tx(data) function to get the htp_tx_t from the htp_tx_data_t
- htp_tx_data_is_empty(data) convenience function introduced to test if the data is empty.
Other changes:
Build libhtp-rs as a crate inside rust. Update autoconf to no longer
use libhtp as an external dependency. Remove HAVE_HTP feature defines
since they are no longer needed.
Make function arguments and return values const where possible
htp_tx_destroy(tx) will now free an incomplete transaction
htp_time_t replaced with standard struct timeval
Callbacks from libhtp now provide the htp_connp_t and the htp_tx_data_t
as separate arguments. This means the connection parser is no longer
fetched from the transaction inside callbacks.
SCHTPGenerateNormalizedUri() functionality moved inside libhtp-rs, which
now provides normalized URI values.
The normalized URI is available with accessor function: htp_tx_normalized_uri()
Configuration settings added to control the behaviour of the URI normalization:
- htp_config_set_normalized_uri_include_all()
- htp_config_set_plusspace_decode()
- htp_config_set_convert_lowercase()
- htp_config_set_double_decode_normalized_query()
- htp_config_set_double_decode_normalized_path()
- htp_config_set_backslash_convert_slashes()
- htp_config_set_bestfit_replacement_byte()
- htp_config_set_convert_lowercase()
- htp_config_set_nul_encoded_terminates()
- htp_config_set_nul_raw_terminates()
- htp_config_set_path_separators_compress()
- htp_config_set_path_separators_decode()
- htp_config_set_u_encoding_decode()
- htp_config_set_url_encoding_invalid_handling()
- htp_config_set_utf8_convert_bestfit()
- htp_config_set_normalized_uri_include_all()
- htp_config_set_plusspace_decode()
Constants related to configuring uri normalization:
- HTP_URL_DECODE_PRESERVE_PERCENT => HTP_URL_ENCODING_HANDLING_PRESERVE_PERCENT
- HTP_URL_DECODE_REMOVE_PERCENT => HTP_URL_ENCODING_HANDLING_REMOVE_PERCENT
- HTP_URL_DECODE_PROCESS_INVALID => HTP_URL_ENCODING_HANDLING_PROCESS_INVALID
htp_config_set_field_limits(soft_limit, hard_limit) changed to
htp_config_set_field_limit(limit) because libhtp didn't implement soft
limits.
libhtp logging API updated to provide HTP_LOG_CODE constants along with
the message. This eliminates the need to perform string matching on
message text to map log messages to HTTP_DECODER_EVENT values, and the
HTP_LOG_CODE values can be used directly. In support of this,
HTP_DECODER_EVENT values are mapped to their corresponding HTP_LOG_CODE
values.
New log events to describe additional anomalies:
HTP_LOG_CODE_REQUEST_TOO_MANY_LZMA_LAYERS
HTP_LOG_CODE_RESPONSE_TOO_MANY_LZMA_LAYERS
HTP_LOG_CODE_PROTOCOL_CONTAINS_EXTRA_DATA
HTP_LOG_CODE_CONTENT_LENGTH_EXTRA_DATA_START
HTP_LOG_CODE_CONTENT_LENGTH_EXTRA_DATA_END
HTP_LOG_CODE_SWITCHING_PROTO_WITH_CONTENT_LENGTH
HTP_LOG_CODE_DEFORMED_EOL
HTP_LOG_CODE_PARSER_STATE_ERROR
HTP_LOG_CODE_MISSING_OUTBOUND_TRANSACTION_DATA
HTP_LOG_CODE_MISSING_INBOUND_TRANSACTION_DATA
HTP_LOG_CODE_ZERO_LENGTH_DATA_CHUNKS
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD_NO_PROTOCOL
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD_INVALID_PROTOCOL
HTP_LOG_CODE_REQUEST_LINE_NO_PROTOCOL
HTP_LOG_CODE_RESPONSE_LINE_INVALID_PROTOCOL
HTP_LOG_CODE_RESPONSE_LINE_INVALID_RESPONSE_STATUS
HTP_LOG_CODE_RESPONSE_BODY_INTERNAL_ERROR
HTP_LOG_CODE_REQUEST_BODY_DATA_CALLBACK_ERROR
HTP_LOG_CODE_RESPONSE_INVALID_EMPTY_NAME
HTP_LOG_CODE_REQUEST_INVALID_EMPTY_NAME
HTP_LOG_CODE_RESPONSE_INVALID_LWS_AFTER_NAME
HTP_LOG_CODE_RESPONSE_HEADER_NAME_NOT_TOKEN
HTP_LOG_CODE_REQUEST_INVALID_LWS_AFTER_NAME
HTP_LOG_CODE_LZMA_DECOMPRESSION_DISABLED
HTP_LOG_CODE_CONNECTION_ALREADY_OPEN
HTP_LOG_CODE_COMPRESSION_BOMB_DOUBLE_LZMA
HTP_LOG_CODE_INVALID_CONTENT_ENCODING
HTP_LOG_CODE_INVALID_GAP
HTP_LOG_CODE_ERROR
The new htp_log API supports consuming log messages more easily than
walking a list and tracking the current offset. Internally, libhtp-rs
now provides log messages as a queue of htp_log_t, which means the
application can simply call htp_conn_next_log() to fetch the next log
message until the queue is empty. Once the application is done with a
log message, they can call htp_log_free() to dispose of it.
Functions supporting htp_log_t:
htp_conn_next_log(conn) - Get the next log message
htp_log_message(log) - To get the text of the message
htp_log_code(log) - To get the HTP_LOG_CODE value
htp_log_free(log) - To free the htp_log_t
This adds a sticky (multi) buffer to match the "Connection data"
subfield of the "Media description" field in both requests and
responses.
Ticket #7291
This adds a stick (multi) buffer to match the "Session information"
subfield of the "Media description" field in both requests and
responses.
Ticket #7291
The current parser implementations take a field, such as connection data, and
split it into subfields for a specific structure (e.g., struct ConnectionData).
However, following this approach requires several sticky buffers to match the
whole field, which can make a rule a bit verbose and doesn't offer any advantage
for matching specific parts of a field.
With this patch, a single line is still split into pieces if it makes sense for
parsing purposes, but these pieces are then reassembled into a single string.
This way, only one sticky buffer is needed to match the entire field.
Ticket #7291
This commit adds keyword/build support for the entropy keyword. The
entropy keyword compares an entropy value with a value calculated
according to the Shannon entropy on the available content.
Issue: 4162
This commit adds
- Parser for the entropy keyword
- Calculation of content the Shannon entropy value
Issue: 4162
The entropy keyword syntax is the keyword entropy followed by options
and the entropy value for comparison.
The minimum entropy keyword specification is:
entropy: value <entropy-spec>
This results in the calculated entropy value being compared with
<entropy-spec> with the equality operator.
Calculated entropy values are between 0.0 and 8.0, inclusive.
A match occurs when the values and operator agree. This example matches
if the calculated and entropy value are the same.
When entropy keyword options are specified, all options and "value" must
be comma-separated. Options and value may be specified in any order.
Options have default values:
- bytes is equal to the current content length
- offset is 0
- comparison with value is equality
entropy: [bytes <byteval>] [offset <offsetval>] value <entropy-spec>
Using default values:
entropy: bytes 0, offset 0, value =<entropy-spec>
<entropy-spec> is: <operator> (see below) and a value, e.g., "< 4.1"
The following operators are available from the float crate:
- = (default): Match when calculated entropy value equals specified entropy value
- < Match when calculated entropy value is strictly less than specified entropy value
- <= Match when calculated entropy value is less than or equal to specified entropy value
- > Match when calculated entropy value is strictly greater than specified entropy value
- >= Match when calculated entropy value is greater than or equal to specified entropy value
- != Match when calculated entropy value is not equal to specified entropy value
- x-y Match when calculated entropy value is in the range, exclusive
- !x-y Match when calculated entropy value is not in the range, exclusive
Reduce per tx space for tracking detection/prefilter progress. Instead
of a per direction u64 of flags, where each bit reflected a progress
value, use a simple u8 to track the linear progression through the
progress values. Use an offset to allow 0 to mean no value.
Add flags field as well to track "skip detect" and "inspect complete".
Deranged v0.4.1 (a dependency of the time crate) has implemented
PartialOrd for some integer types that conflict with the
implementation in the standard library creating an ambiguity as such
implementation are global. For more info see
https://github.com/jhpratt/deranged/issues/18.
To fix, use "::from" directly, instead of using .into() which is where
we run into amgibuity.
Notable changes from the previous API:
- rcode will return the rcode as an integer
- rcode_string will return the string representation
Also fixes an issue where an rcode of 0 was returned as nil.
Ticket: #7602
Feature: 7012
Add dns.response sticky buffer to match on dns response fields.
Add rust functions to return dns response packet data.
Unit tests verifying signature matching.
ldap.responses.message matches on LDAPResult error message
This keyword maps the following eve fields:
ldap.responses[].bind_response.message
ldap.responses[].search_result_done.message
ldap.responses[].modify_response.message
ldap.responses[].add_response.message
ldap.responses[].del_response.message
ldap.responses[].mod_dn_response.message
ldap.responses[].compare_response.message
ldap.responses[].extended_response.message
It is a sticky buffer
Supports prefiltering
Ticket: #7532
ldap.responses.result_code matches on LDAP result code
This keyword maps the following eve fields:
ldap.responses[].bind_response.result_code
ldap.responses[].search_result_done.result_code
ldap.responses[].modify_response.result_code
ldap.responses[].add_response.result_code
ldap.responses[].del_response.result_code
ldap.responses[].mod_dn_response.result_code
ldap.responses[].compare_response.result_code
ldap.responses[].extended_response.result_code
It is an unsigned 32-bit integer
Doesn't support prefiltering
Ticket: #7532
Funciton ldap_tx_get_responses_dn returns empty buffer in case
the response doesn't contain the distinguished name field
Fixes: 73ae6e997f ("detect: add ldap.responses.dn")
Change variable name 'req' to 'resp' in function ldap_tx_get_responses_dn and documentation nits
Fixes:
73ae6e997f ("detect: add ldap.responses.dn")
16dcee46fc ("detect: add ldap.request.dn")
Juliana Fajardini
Jason Ish
Philippe Antoine
Shivani Bhardwaj
Jeff Lucovsky
Richard McConnell
Victor Julien
Alice Akaki
Alex Savage
Eric Leblond
Lukas Sismis
Philippe Antoine
Todd Mortimer
Giuseppe Longo
Bryan Benson
Nathan Scrivens