There shouldn't be duplicated messages in the requests Vec. And thus
the parser shouldn't log duplicated keys nor messages. Add debug
validations to ensure this.
With PGSQL's current state machine, most frontend/ client messages will
lead to the creation of a new transaction - which would prevent
duplicated messages being pushed to the requests array and reaching the
logger.
The current exceptions for that are:
- CopyDataIn
- CopyDone
- CopyFail
Thus, debug statements were added for those cases.
CopyDone and CopyFail, per the documentation, shouldn't be seen
duplicated on the wire for the same transaction. CopyDataIn -- yes, but
we consolidate those, so the expectation is that they won't be
duplicated in the requests array or when reaching the logger either.
Related to
Task #7645
We used `copy_column_count`, while just `columns` is more accurate with
what PostgreSQL describes, and what Wireshark shows.
Related to
Task #7644
Task #7645
While this could be considered minor, they were not just bad, but
misleading names, as the variables weren't really `dummy` responses,
but consolidating several messages.
This sub-protocol inspects messages sent mainly from the frontend to
the backend after a 'COPY FROM STDIN' has been processed by the
backend.
Parses new messages:
- CopyInResponse -- initiates copy-in mode/sub-protocol
- CopyData (In) -- data transfer message, from frontend to backend
- CopyDone -- signals that no more CopyData messages will be seen from
the frontend, for the current transaction
- CopyFail -- used by the frontend to signal some failure to proceed
with sending CopyData messages
Task #7645
Important for CopyIn mode/ subprotocol, where the frontend is the one
sending 0 or more messages to the backend as part of a transaction.
Related to
Task #7645
As SCDetectTransformFromBase64Data is not a flat structure,
because it has pointers to other buffers, we cannot use it simply
for TransformId
We need to compute a serialization of the data hold by
SCDetectTransformFromBase64Data and own it.
The mDNS support is based heavily on the DNS support, reusing the
existing DNS parser where possible. This meant adding variations on
DNS, as mDNS is a little different. Mainly being that *all* mDNS
traffic is to_server, yet there is still the concept of request and
responses.
Keywords added are:
- mdns.queries.rrname
- mdns.answers.rrname
- mdns.additionals.rrname
- mdns.authorities.rrname
- mdns.response.rrname
They are mostly in-line with the DNS keywords, except
mdns.answers.rdata which is a better than that mdns.response.rrname,
as its actually looking at the rdata, and not rrnames.
mDNS has its own logger that differs from the DNS logger:
- No grouped logging
- In answers/additionals/authorities, the rdata is logged in a field
that is named after the rdata type. For example, "txt" data is no
longer logged in the "rdata" field, but instead a "txt" field. We
currently already did this in DNS for fields that were not a single
buffer, like SOA, SRV, etc. So this makes things more consistent. And
gives query like semantics that the "grouped" object was trying to
provide.
- Types are logged in lower case ("txt" instead of "TXT")
- Flags are logged as an array: "flags": ["aa", "z"]
Ticket: #3952
A DNS TXT answer record can actually be made of up multiple TXT
entries in a single record. Suricata currently expands these into
multiple TXT records, however that is not very representative of the
actualy DNS message.
Instead, if a TXT record contains multiple labels, parse them into an
array.
We still expand multiple TXT segements into multiple TXT records at
logging time for compatibility, but this will allow something like
MDNS to log more accurately to the protocol.
Add the `pgsql.query` rule keyword to match on PGSQL's query
request message contents. This currently matches on the EVE field:
pgsql.request.simple_query
`pgsql.query` is a sticky buffer and can be used as a fast_pattern.
Task #6259
This is required for crates that use a C compiler to use the same one as
used by Suricata. Important for cross compiling.
Also pass AR and RANLIB which are often used for cross compiling.
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
Websocket parser creates a new PDU per transaction in each direction. Appropriate
calls to trigger raw stream inspection have been added on succesful parsing of
each PDU.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
SSH parser creates a new record per request or response. Appropriate calls
to trigger raw stream inspection have been added on succesful parsing of
each request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
SIP parser creates a new transaction per request or response. Appropriate calls
to trigger raw stream inspection have been added on creation of each request and
response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
RFB has several different types of requests and responses. Appropriate calls
to trigger raw stream inspection have been added on completion of each type of
request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
RDP parser creates a transaction per request or response. Appropriate calls
to trigger raw stream inspection have been added on completion of each request
and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
POP3 has a classic request response model where a request is mapped to
a response although not by any ID. Appropriate calls to trigger raw stream
inspection have been added on completion of each request and response.
Task 7026
Bug 7004
Internals
---------
Suricata's stream engine returns data for inspection to the detection
engine from the stream when the chunk size is reached.
Bug
---
Inspection triggered only in the specified chunk sizes may be too late
when it comes to inspection of smaller protocol specific data which
could result in delayed inspection, incorrect data logged with a transaction
and logs misindicating the pkt that triggered an alert.
Fix
---
Fix this by making an explicit call from all respective applayer parsers to
trigger raw stream inspection which shall make the data available for inspection
in the following call of the stream engine. This needs to happen per direction
on the completion of an entity like a request or a response.
Important notes
---------------
1. The above mentioned behavior with and without this patch is
affected internally by the following conditions.
- inspection depth
- stream depth
In these special cases, the inspection window will be affected and
Suricata may not consider all the data that could be expected to be
inspected.
2. This only applies to applayer protocols running over TCP.
3. The inspection window is only considered up to the ACK'd data.
4. This entire issue is about IDS mode only.
NFS has a classic request response model where each request is mapped to
a corresponding response. Additionally, there's also file tracking and
handling done as a part of these transactions. Appropriate calls to
trigger raw stream inspection have been added on completion of each
request and response.
Task 7026
Bug 7004
The functions around TriggerRawStreamReassembly are misnomers in the
current layout of the code. The functions were named appropriately when
they were created as per the structural and logical layout of the code
at the time.
These functions in today's code are being used to track, update and
trigger progress of inspection in the raw stream only. Hence, rename them
to TriggerRawStreamInspection.
Issue: 7507
Implement the ftp.completion_code sticky buffer. Multi-buffer as an FTP
command can produce multiple responses.
E.g., with the FTP command RETR
RETR temp.txt
150 Opening BINARY mode data connection for temp.txt (1164 bytes).
226 Transfer complete.
sawp crate has its own Direction enum as follows.
pub enum Direction {
ToClient = 0,
ToServer = 1,
Unknown = 2,
}
While it is correct to send this Direction enum as argument to the
sawp_pop3 parser as it expects, it is not correct to use it where the
direction param is obtained from the internal API of Suricata.
The reason is that Suricata's definition of its Direction enum is as
follows.
pub enum Direction {
ToServer = 0x04,
ToClient = 0x08,
}
This can lead to issues like incorrect progress tracking of a transaction in
a direction which could cause inspection on incorrect data and buggy behavior.
Issue: 7506
Add a (non-sticky buffer) keyword for ftp.reply_received. This is not a
sticky buffer as the keyword relates to protocol state and not bytes
from the actual protocol exchange.
ftp.reply_received: yes|on|no|off
Introduce DetectGetSingleData which does the generic wrapping,
including the transforms, using a new callback prototype
DetectTxGetBufferPtr
The goal is to replace most InspectionBufferGetDataPtr.
For this commit, we do not change every callback to keep the
change relatively small.
Focus here is to remove DetectHelperGetData as its functionality is
provided more directly by the new DetectTxGetBufferPtr.
Ticket: 6695
"server_handshake" which logs the following:
1. TLS version used during handshake
2. The chosen cipher suite, excluding GREASE
3. TLS extensions, excluding GREASE
Ticket: 6695
Add new custom log fields:
"client_handshake" which logs the following:
1. TLS version used during handshake
2. TLS extensions, excluding GREASE, SNI and ALPN
3. All cipher suites, excluding GREASE
4. All signature algorithms, excluding GREASE
The use-case is for logging TLS handshake parameters in order to survey
them, and so that JA4 hashes can be computed offline (in the case that
they're not already computed for the purposes of rule matching).
This commit is designed in preparation of enabling the handshake object
to log it's own contents rather than being done on the C side.
Moving the tls versions functionality to rust has a couple of uses:
1. Allows both rust and C side to use these fields
2. Moves more of the tls related logic to rust
3. C side can still use these values because of cbindgen
Philippe Antoine
Juliana Fajardini
Jason Ish
Shivani Bhardwaj
Jeff Lucovsky
Richard McConnell