toggle command is not used by any major rulesets and increases the state
complexity of flowbits management. Also, all operations can be carried
out with the combination of other available commands. So, remove it.
Task 8595
Ticket: 8518
Keywords that work for HTTP2 headers match now as soon as possible
A push promise is now considered like a headers frame with regards
to the progress (no dedicated "reserved" progress/state)
http.protocol and http.stat_msg keywords are now registered at
earliest progress, since these are synthetic like "HTTP/2" and
not really seen on the wire.
http.request_line and http.response_line match only on data,
and not on headers, since we must wait the end of headers
to be sure to have the full line
http2.size_update now matches at headers progress as it should
http2.frametype, http2.errorcode, http2.priority now match like
http2.window, when the tx is complete from both sides, as a
half-closed client may still send priority, rst_stream
or window_update frames
This run-mode does not allow for capture ThreadVars to be created at
the appropriate place in the application life cycle. Instead,
applications should register their own custom run-mode.
Ticket: #8259
If the key `app-layer.protocols.PROTO.enabled` is present, the protocol
is enabled for all carrier protocols. This is not ideal.
Only if the key `app-layer.protocols.PROTO.enabled` is missing, an
attempt is made to look for a setting specific to the ipproto passed
at the time of registration e.g.
`app-layer.protocols.PROTO.udp.enabled`.
By default, check for carrier proto specific setting. If it is not
found, then fall back to the generic setting.
Issue a warning in case an inconsistent combination of global and
ipproto specific setting is found.
Bug 8205
Hyperscan MPM can cache the compiled contexts to files.
This however grows as rulesets change and leads to bloating
the system. This addition prunes the stale cache files based
on their modified file timestamp.
Part of this work incorporates new model for MPM cache stats
to split it out from the cache save function and aggregate
cache-related stats in one place (newly added pruning).
Ticket: 7830
16384 is used as the max, but a configuration parameter has been
provided. The reason for setting an upper bound is that bit flags can
create a memory amplification as we parse them into individual data
structures.
Ticket: #8181
Lower the number of unreplied requests from 500 to 32 to consider a
flood. At the very least this is an anomaly given the DNP3 spec mentions
that DNP3 should only have one outstanding request at a time, with an
exception for unsolicited responses, so in practice no more than 2
should be seen.
Additionally make this value configurable by introducing the max-tx
parameter.
Ticket: #8181
Issue: 7855
Highlight the change to how ether_type values are displayed. Previously,
they were displayed in network order as a decimal value.
They are now displayed in host order as a decimal value.
Following commit 5379b52af2
rules that use multiple times the keyword tls.cert_subject
will result in
Warning: detect: duplicate instance for tls.cert_subject
These rules likely meant to use a multi-buffer which is not the
case for tls.cert_subject (even if it was documented so).
Ticket: 7890
This is put in a new section of upgrade notes for
upgrading to 8.0.1
Remove unused rule prefilter-related stats counters that aren't in use.
94644ac960 (detect: move non-pf rules into special prefilter engines)
removed the logic that made use of and incremented the stats counters:
- det_ctx->counter_fnonmpm_list
- det_ctx->counter_nonmpm_list
Some code was left, registering them, and mentioning them in the
json schema.
Ticket #7834
Provide backward compatibility with the previous configuration
format to allow smooth transition to the new format.
The commit adds docs about the new format and the introduced changes.
The PR for the behavior change of dealing with spaces in http URI and
protocol was started in 2019 and merged in 2024. When the PR was
created, it belonged to the correct upgrade section, however, by the
time it was merged, it was 8.0.x branch already.
Move it to upgrade notes from 7 to 8 for correctness.
Decouple app.protocols.tls.encryption-handling and stream.bypass.
There's no apparent reason why encrypted TLS bypass traffic should
depend on stream bypass, as these are unrelated features.
Ticket: 6788
The default value for TLS encryption is generic and not precise.
The new keyword, "track-only" substitues the old keyword, being
more on point what action is actually taken when the TLS flow
reaches an encrypted state.
Ticket: #2696
There are a lot of changes here, which are described below.
In general these changes are renaming constants to conform to the
libhtp-rs versions (which are generated by cbindgen); making all htp
types opaque and changing struct->member references to
htp_struct_member() function calls; and a handful of changes to offload
functionality onto libhtp-rs from suricata, such as URI normalization
and transaction cleanup.
Functions introduced to handle opaque htp_tx_t:
- tx->parsed_uri => htp_tx_parsed_uri(tx)
- tx->parsed_uri->path => htp_uri_path(htp_tx_parsed_uri(tx)
- tx->parsed_uri->hostname => htp_uri_hostname(htp_tx_parsed_uri(tx))
- htp_tx_get_user_data() => htp_tx_user_data(tx)
- htp_tx_is_http_2_upgrade(tx) convenience function introduced to detect response status 101
and “Upgrade: h2c" header.
Functions introduced to handle opaque htp_tx_data_t:
- d->len => htp_tx_data_len()
- d->data => htp_tx_data_data()
- htp_tx_data_tx(data) function to get the htp_tx_t from the htp_tx_data_t
- htp_tx_data_is_empty(data) convenience function introduced to test if the data is empty.
Other changes:
Build libhtp-rs as a crate inside rust. Update autoconf to no longer
use libhtp as an external dependency. Remove HAVE_HTP feature defines
since they are no longer needed.
Make function arguments and return values const where possible
htp_tx_destroy(tx) will now free an incomplete transaction
htp_time_t replaced with standard struct timeval
Callbacks from libhtp now provide the htp_connp_t and the htp_tx_data_t
as separate arguments. This means the connection parser is no longer
fetched from the transaction inside callbacks.
SCHTPGenerateNormalizedUri() functionality moved inside libhtp-rs, which
now provides normalized URI values.
The normalized URI is available with accessor function: htp_tx_normalized_uri()
Configuration settings added to control the behaviour of the URI normalization:
- htp_config_set_normalized_uri_include_all()
- htp_config_set_plusspace_decode()
- htp_config_set_convert_lowercase()
- htp_config_set_double_decode_normalized_query()
- htp_config_set_double_decode_normalized_path()
- htp_config_set_backslash_convert_slashes()
- htp_config_set_bestfit_replacement_byte()
- htp_config_set_convert_lowercase()
- htp_config_set_nul_encoded_terminates()
- htp_config_set_nul_raw_terminates()
- htp_config_set_path_separators_compress()
- htp_config_set_path_separators_decode()
- htp_config_set_u_encoding_decode()
- htp_config_set_url_encoding_invalid_handling()
- htp_config_set_utf8_convert_bestfit()
- htp_config_set_normalized_uri_include_all()
- htp_config_set_plusspace_decode()
Constants related to configuring uri normalization:
- HTP_URL_DECODE_PRESERVE_PERCENT => HTP_URL_ENCODING_HANDLING_PRESERVE_PERCENT
- HTP_URL_DECODE_REMOVE_PERCENT => HTP_URL_ENCODING_HANDLING_REMOVE_PERCENT
- HTP_URL_DECODE_PROCESS_INVALID => HTP_URL_ENCODING_HANDLING_PROCESS_INVALID
htp_config_set_field_limits(soft_limit, hard_limit) changed to
htp_config_set_field_limit(limit) because libhtp didn't implement soft
limits.
libhtp logging API updated to provide HTP_LOG_CODE constants along with
the message. This eliminates the need to perform string matching on
message text to map log messages to HTTP_DECODER_EVENT values, and the
HTP_LOG_CODE values can be used directly. In support of this,
HTP_DECODER_EVENT values are mapped to their corresponding HTP_LOG_CODE
values.
New log events to describe additional anomalies:
HTP_LOG_CODE_REQUEST_TOO_MANY_LZMA_LAYERS
HTP_LOG_CODE_RESPONSE_TOO_MANY_LZMA_LAYERS
HTP_LOG_CODE_PROTOCOL_CONTAINS_EXTRA_DATA
HTP_LOG_CODE_CONTENT_LENGTH_EXTRA_DATA_START
HTP_LOG_CODE_CONTENT_LENGTH_EXTRA_DATA_END
HTP_LOG_CODE_SWITCHING_PROTO_WITH_CONTENT_LENGTH
HTP_LOG_CODE_DEFORMED_EOL
HTP_LOG_CODE_PARSER_STATE_ERROR
HTP_LOG_CODE_MISSING_OUTBOUND_TRANSACTION_DATA
HTP_LOG_CODE_MISSING_INBOUND_TRANSACTION_DATA
HTP_LOG_CODE_ZERO_LENGTH_DATA_CHUNKS
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD_NO_PROTOCOL
HTP_LOG_CODE_REQUEST_LINE_UNKNOWN_METHOD_INVALID_PROTOCOL
HTP_LOG_CODE_REQUEST_LINE_NO_PROTOCOL
HTP_LOG_CODE_RESPONSE_LINE_INVALID_PROTOCOL
HTP_LOG_CODE_RESPONSE_LINE_INVALID_RESPONSE_STATUS
HTP_LOG_CODE_RESPONSE_BODY_INTERNAL_ERROR
HTP_LOG_CODE_REQUEST_BODY_DATA_CALLBACK_ERROR
HTP_LOG_CODE_RESPONSE_INVALID_EMPTY_NAME
HTP_LOG_CODE_REQUEST_INVALID_EMPTY_NAME
HTP_LOG_CODE_RESPONSE_INVALID_LWS_AFTER_NAME
HTP_LOG_CODE_RESPONSE_HEADER_NAME_NOT_TOKEN
HTP_LOG_CODE_REQUEST_INVALID_LWS_AFTER_NAME
HTP_LOG_CODE_LZMA_DECOMPRESSION_DISABLED
HTP_LOG_CODE_CONNECTION_ALREADY_OPEN
HTP_LOG_CODE_COMPRESSION_BOMB_DOUBLE_LZMA
HTP_LOG_CODE_INVALID_CONTENT_ENCODING
HTP_LOG_CODE_INVALID_GAP
HTP_LOG_CODE_ERROR
The new htp_log API supports consuming log messages more easily than
walking a list and tracking the current offset. Internally, libhtp-rs
now provides log messages as a queue of htp_log_t, which means the
application can simply call htp_conn_next_log() to fetch the next log
message until the queue is empty. Once the application is done with a
log message, they can call htp_log_free() to dispose of it.
Functions supporting htp_log_t:
htp_conn_next_log(conn) - Get the next log message
htp_log_message(log) - To get the text of the message
htp_log_code(log) - To get the HTP_LOG_CODE value
htp_log_free(log) - To free the htp_log_t
ICE card (Intel E810) was not receiving packets immediatelly
after startup, Suricata workers would act as processing while
it was not. This eliminates the problem by only continuing
in the initialization if the link is already up.
The setting can be turned off manually from the configuraiton
file.
Ticket: 7381
It turned out that having global (interface-specific) mempool
that is shared by the threads of the interface is slower than
having individual mempools per queue for each interface.
The commit brings this change and should be user-invisible,
the config setting remains still as a number of objects of
all mempools summed (of that interface).
Ticket: 7382
Issue: 4082
Move the configuration file handling to Rust.
These changes will no longer terminate Suricata when there's an invalid
value for ftp.memcap. Like earlier Suricata releases, an error message
is logged "Invalid value <value> for ftp.memcap" but Suricata will no
longer terminate execution. It will use a default value of "0" instead.
Ticket: 7199
Uses a config parameter detect.guess-applayer-tx to enable
this behavior (off by default)
This feature is requested for use cases with signatures not
using app-layer keywords but still targetting application
layer transactions, such as pass/drop rule combination,
or lua usage.
This overrides the previous behavior of checking if the signature
has a content match, by checking if there is only one live
transaction, in addition to the config parameter being set.
For example, "requires: foo bar" is an unknown requirement, however
its not tracked, nor an error as it follows the syntax. Instead,
record these unknown keywords, and fail the requirements check if any
are present.
A future version of Suricata may have new requires keywords, for
example a check for keywords.
Ticket: #7418
Shivani Bhardwaj
Philippe Antoine
Jason Ish
Giuseppe Longo
Victor Julien
Juliana Fajardini
Lukas Sismis
Jeff Lucovsky
Thomas Winter
Shivani Bhardwaj
Dean Balandin
Todd Mortimer