When switching protocol from http to tls the following corner case
was observed:
pkt 6, TC "200 connection established"
pkt 7, TS acks pkt 6 + adds "client hello"
pkt 8 TC, acks pkt 7
pkt 8 is where normally the detect on the 200 connection established
would run however before detection runs the app-layer is called
and it resets the state
So the issue is missed detection on the last data in the original
protocol before the switch.
Another case was:
TS -> STARTTLS
TC -> Ack "STARTTLS data"
220
TS -> Ack "220 data"
Client Hello
In IDS mode, this made a rule that wanted to look at content:"STARTTLS"
in combination with the protocol SMTP 'alert smtp ... content:"STARTTLS";'
impossible. By the time the content would match, the protocol was already
switched.
This patch fixes this case by creating a 'Detect/Log Flush' packet in
both directions. This will force final inspection and logging of the
pre-upgrade protocol (SMTP in this example) before doing the final
switch.
Set flags by default:
-Wmissing-prototypes
-Wmissing-declarations
-Wstrict-prototypes
-Wwrite-strings
-Wcast-align
-Wbad-function-cast
-Wformat-security
-Wno-format-nonliteral
-Wmissing-format-attribute
-funsigned-char
Fix minor compiler warnings for these new flags on gcc and clang.
Due to the use of AFL_LOOP and initialization/deinit outside of it,
part of the fuzzing relied on the global 'state' in flow and defrag.
Because of this crashes that were found could not be reproduced. The
saved crash input was only the last in the series.
This patch addresses that. It requires a new output directory 'dump'
where the packet fuzzers will store all their input. If the AFL_LOOP
fails the files will not be removed and this 'serie' can be read
again for reproducing the issue.
e.g.: AFL would work with:
--afl-decoder-ppp=@@
and after a crash is found the produced serie can be read with:
--afl-decoder-ppp-serie=1486656919-514163
The series have a timestamp as name and a suffix that controls the
order in which the files will be 'replayed' in Suricata.
Call the packet bypass callback if necessary and update the flow
state. In case of failure we switch to local bypassed state and set
capture bypassed state if the callback is successful.
Add support for AFL PERSISTANT_MODE when Suricata is compiled with
a supported compiler (only afl-clang-fast for now).
This gives a ~10x performance boost when fuzzing.
We want to add counters in order to track the number of times we hit a
decode event. A decode event is related to an error in the protocol
decoding over a certain packet.
This patch fist modifies the decode-event list, reordering it in order
to separate single packet events from stream-related events and adding
the prefix "decoder" to decode events.
The counters are created during the decode setup and the relative event
counter is increased every time a packet with the flag PKT_IS_INVALID is
finalized in the decode phase
This adds a counter indicating how many times
the flow max memcap has been reached
Since there is no always a reference to FlowManagerThreadData,
the counter is put in DecodeThreadVars.
Currently when there is no counter increase in one call of FlowGetNew
because we don't have tv or dtv at the time of the call.
The following is a snippet of the generated EVE entry:
"flow":{"memcap":0,"spare":10000,"emerg_mode_entered":0,"emerg_mode_over":0,"tcp_reuse":0,"memuse":7085248}
Store the tenant id in the flow and use the stored id when setting
up pesudo packets.
For tunnel and defrag packets, get tenant from parent. This will only
pass tenant_id's set at capture time.
For defrag packets, the tenant selector based on vlan id will still
work as the vlan id(s) are stored in the defrag tracker before being
passed on.
Implement LINKTYPE_NULL for pcap live and pcap file.
From: http://www.tcpdump.org/linktypes.html
"BSD loopback encapsulation; the link layer header is a 4-byte field,
in host byte order, containing a PF_ value from socket.h for the
network-layer protocol of the packet.
Note that ``host byte order'' is the byte order of the machine on
which the packets are captured, and the PF_ values are for the OS
of the machine on which the packets are captured; if a live capture
is being done, ``host byte order'' is the byte order of the machine
capturing the packets, and the PF_ values are those of the OS of
the machine capturing the packets, but if a ``savefile'' is being
read, the byte order and PF_ values are not necessarily those of
the machine reading the capture file."
Feature ticket #1445
In flow timeout handling we need a function that allocate and blank
a place that will be used to put constructed packet data. This new
function has no other goal.
The field ext_pkt was cleaned before calling the release function.
The result was that IPS mode such as the one of AF_PACKET were not
working anymore because they were not able to send the data which
were initially pointed by ext_pkt.
This patch moves the ext_pkt cleaning to the cleaning macro. This
ensures that the cleaning is done for allocated and pool packets.
Using a stack for free Packet storage causes recently freed Packets to be
reused quickly, while there is more likelihood of the data still being in
cache.
The new structure has a per-thread private stack for allocating Packets
which does not need any locking. Since Packets can be freed by any thread,
there is a second stack (return stack) for freeing packets by other threads.
The return stack is protected by a mutex. Packets are moved from the return
stack to the private stack when the private stack is empty.
Returning packets back to their "home" stack keeps the stacks from getting out
of balance.
The PacketPoolInit() function is now called by each thread that will be
allocating packets. Each thread allocates max_pending_packets, which is a
change from before, where that was the total number of packets across all
threads.
Extended data were freed before the release function was called.
The result was that, in AF_PACKET IPS mode, the release function
was only sending void data because it the content of the extended
data is the content of the packet.
This patch updates the code to have the freeing of extended data
done in the cleaning function for a packet which is called by the
release function. This improves consistency of the code and fixes
the bug.
This patch introduces a new counter "decoder.vlan_qinq". It counts
packets that have more than two stacked vlan layers.
Packets with 2 vlan layers will both increment "decoder.vlan" and
"decoder.vlan_qinq".
When creating a pseudo packet with the reassembled IP packet, the
parent's vlan id or id's are also needed. The defrag packet is run
through decode and the flow engine, where the vlan id is necessary
for connecting the packet to the correct flow.
To be able to register counters from AppLayerGetCtxThread, the
ThreadVars pointer needs to be available in it and thus in it's
callers:
- AppLayerGetCtxThread
- DecodeThreadVarsAlloc
- StreamTcpReassembleInitThreadCtx
app-layer.[ch], app-layer-detect-proto.[ch] and app-layer-parser.[ch].
Things addressed in this commit:
- Brings out a proper separation between protocol detection phase and the
parser phase.
- The dns app layer now is registered such that we don't use "dnstcp" and
"dnsudp" in the rules. A user who previously wrote a rule like this -
"alert dnstcp....." or
"alert dnsudp....."
would now have to use,
alert dns (ipproto:tcp;) or
alert udp (app-layer-protocol:dns;) or
alert ip (ipproto:udp; app-layer-protocol:dns;)
The same rules extend to other another such protocol, dcerpc.
- The app layer parser api now takes in the ipproto while registering
callbacks.
- The app inspection/detection engine also takes an ipproto.
- All app layer parser functions now take direction as STREAM_TOSERVER or
STREAM_TOCLIENT, as opposed to 0 or 1, which was taken by some of the
functions.
- FlowInitialize() and FlowRecycle() now resets proto to 0. This is
needed by unittests, which would try to clean the flow, and that would
call the api, AppLayerParserCleanupParserState(), which would try to
clean the app state, but the app layer now needs an ipproto to figure
out which api to internally call to clean the state, and if the ipproto
is 0, it would return without trying to clean the state.
- A lot of unittests are now updated where if they are using a flow and
they need to use the app layer, we would set a flow ipproto.
- The "app-layer" section in the yaml conf has also been updated as well.
The uint8_t *pkt in the Packet structure always points to the memory
immediately following the Packet structure. It is better to simply
calculate that value every time than store the 8 byte pointer.
If we have multiple layer of tunnel, the decoding of initial
Packet will recurse in DecodeTunnel function called in
PacketTunnelPktSetup. If we are not setting the pseudo
packet root before calling DecodeTunnel (as done in previous
code), then the tunnel root will no be correct for the lower
layer packets. This result in an counter problem and a suricata
failure after some time.
This patch adds and increments a invalid packet counter. It
does this by introducing PacketDecodeFinalize function
This function is incrementing the invalid counter and is also
signalling the packet to CUDA.
This patch replaces PacketPseudoPktSetup by a better named
PacketTunnelPktSetup function which is also in charge of doing
the decoding of the tunneled packet.
This allow to clean the code. But it also fixes an issue.
Previously, if the DecodeTunnel function was failling (cause of
an invalid packet mainly), the result was that the original packet
to be considered as a tunnel packet (and not inspected by payload
detection).
In some cases, the decoding is not possible and some really invalid
packet can be created. This is in particular the case of tunnel. In
that case, it is more interesting to forget about the tunneled
packet and only consider the original packet.
DecodeTunnel function is maked as warn_unused_result because it is
meaningful for the decoder to know if the underlying data were not
correct. And in this case, only focus detection on the content.
Victor Julien
Eric Leblond
Giuseppe Longo
Mats Klepsland
Maurizio Abba
Jason Ish
Ken Steele
Anoop Saldanha