Set event at most once per flow, for the first 'wrong' packet.
Add 'tcp.pkt_on_wrong_thread' counter. This is incremented for each
'wrong' packet. Note that the first packet for a flow determines
what thread is 'correct'.
In case of a valid RST on a SYN, the state is switched to 'TCP_CLOSED'.
However, the target of the RST may not have received it, or may not
have accepted it. Also, the RST may have been injected, so the supposed
sender may not actually be aware of the RST that was sent in it's name.
In this case the previous behavior was to switch the state to CLOSED and
accept no further TCP updates or stream reassembly.
This patch changes this. It still switches the state to CLOSED, as this
is by far the most likely to be correct. However, it will reconsider
the state if the receiver continues to talk.
To do this on each state change the previous state will be recorded in
TcpSession::pstate. If a non-RST packet is received after a RST, this
TcpSession::pstate is used to try to continue the conversation.
If the (supposed) sender of the RST is also continueing the conversation
as normal, it's highly likely it didn't send the RST. In this case
a stream event is generated.
Ticket: #2501
Reported-By: Kirill Shipulin
Common /usr/share/suricata/rules or /usr/local/share/suricata/rules.
The rules provided by the distribution are installed here as part
of the Suricata install process so will always be installed, even
without the use of install-rules.
Implement SMB app-layer parser for SMB1/2/3. Features:
- file extraction
- eve logging
- existing dce keyword support
- smb_share/smb_named_pipe keyword support (stickybuffers)
- auth meta data extraction (ntlmssp, kerberos5)
This rule will match on the STREAM_3WHS_ACK_DATA_INJECT, that is
set if we're:
- in IPS mode
- get a data packet from the server
- that matches the exact SEQ/ACK expectations for the 3whs
The action of the rule is set to drop as the stream engine will drop.
So the rule action is actually not needed, but for consistency it
is drop.
Add API calls to upgrade to TLS or to request a protocol change
without a specific protocol expectation.
If the HTTP CONNECT session includes a port on the url, use that to
look up the probing parser during protocol detection. Solves a
missed detection of a SSLv2 session that upgrades to TLSv1. SSLv2
relies on the probing parser which is limited to certain ports.
In case of STARTTLS in SMTP and FTP, the port is hardcoded to 443.
A new event APPLAYER_UNEXPECTED_PROTOCOL is set if there was a
mismatch.
Tls packets may contain several records. This increase the number
of allowed records per packet from 30 to 255, and adds a new and
more informative decoder event when this limit is reached.
The rules were using the wrong decoder event type, which was
only set in the unlikely event of a complete overlap, which
really had nothing to do with being too large.
Remove FRAG_TOO_LARGE as its no longer being used, an overlap
event is already set in the case where this event would be set.
Cisco Fabric Path is ethernet wrapped in an ethernet like header
with 2 extra bytes. The ethernet type is in the same location
so the ethernet decoder can be used with some validation
for the extra length.
This patch fixes the following leak:
Direct leak of 9982880 byte(s) in 2902 object(s) allocated from:
#0 0x4c253b in malloc ??:?
#1 0x10c39ac in MimeDecInitParser /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/util-decode-mime.c:2379
#2 0x6a0f91 in SMTPProcessRequest /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/app-layer-smtp.c:1085
#3 0x697658 in SMTPParse /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/app-layer-smtp.c:1185
#4 0x68fa7a in SMTPParseClientRecord /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/app-layer-smtp.c:1208
#5 0x6561c5 in AppLayerParserParse /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/app-layer-parser.c:908
#6 0x53dc2e in AppLayerHandleTCPData /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/app-layer.c:444
#7 0xf8e0af in DoReassemble /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp-reassemble.c:2635
#8 0xf8c3f8 in StreamTcpReassembleAppLayer /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp-reassemble.c:3028
#9 0xf94267 in StreamTcpReassembleHandleSegmentUpdateACK /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp-reassemble.c:3404
#10 0xf9643d in StreamTcpReassembleHandleSegment /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp-reassemble.c:3432
#11 0xf578b4 in HandleEstablishedPacketToClient /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp.c:2245
#12 0xeea3c7 in StreamTcpPacketStateEstablished /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp.c:2489
#13 0xec1d38 in StreamTcpPacket /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp.c:4568
#14 0xeb0e16 in StreamTcp /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/stream-tcp.c:5064
#15 0xff52a4 in TmThreadsSlotVarRun /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/tm-threads.c:130
#16 0xffdad1 in TmThreadsSlotVar /home/victor/qa/buildbot/donkey/z600fuzz/Private/src/tm-threads.c:474
#17 0x7f7cd678d181 in start_thread /build/buildd/eglibc-2.19/nptl/pthread_create.c:312 (discriminator 2)
We come to this case when a SMTP session contains at least 2 mails
and then the ending of the first is not correctly detected. In that
case, switching to a new tx seems a good solution. This way we still
have partial logging.
Philippe Antoine
Sascha Steinbiss
Victor Julien
Jason Ish
Jeff Lucovsky
William Stearns
Jason Ish
Pierre Chifflier
Pascal Delalande
Andreas Herz
Mats Klepsland
Eric Leblond