Introduce a maximum SAN limit of 4k instead of returning a u16 casted
count of TLS X.509 SubjectAltNames, saturate the count to make sure it
stays within the 4k bounds without truncating the existing count value.
Ticket: 8864
ENIP parser makes use of nom's complete macros which by design expect
full data to be passed along to them. In case there is incomplete data
sent to them, they result in an error. This disables the ENIP parser and
further detection and could happen with an incomplete/fragmented
request/response.
Use AppLayerResult API to ask for more data from the stream engine in
case the stream slice currently at hand does not match the length
parameters received from the header or is not long enough to parse the
header itself.
Ticket: 8809
In "tx:answers()" don't attempt to push each OPT as its own string,
instead concatenate into one string like we do with TXT.
The previous method was broken and didn't work anyways, so we're not
breaking something that previously worked.
Ticket: 8843
Ticket: 8731
Adds a configurable limit to string lengths to avoid to retain
too much memory for too long, and avoid producing log events
that are too big
nfs4_res_secinfo_no_name() used a local var "i2" to walk through
the security-flavor array entries, but returned the pre-walk var "i"
in the Ok at the end. Every byte of the flavor array was therefore left
unconsumed in the input stream and re-interpreted by count next iteration
as a subsequent compound operation.
Addressed by returning i2 instead of i so all flavor bytes are consumed.
Ticket: #8860.
Fail rule load when byte_math pairs << or >> with a literal rvalue of
64 or more. rvalue was bounded only to u32::MAX, so a rule shifting by
100 loaded and then produced 0 for every packet it inspected, spending
detection work on a comparison whose outcome was settled before the
first packet arrived.
A variable rvalue still loads. Its value comes from a byte_extract on
the packet and is not known until the rule runs, so the guard in
DetectByteMathDoMatch() stays the only check covering that path.
DetectByteMathParse() reports every SCByteMathParse() failure as
"invalid bytemath values", so the rejected rule is named by the
"error parsing signature" line that follows rather than by the reason
the parser gave.
Issue: 8845
Add accessor functions to allow NDPI and our plugin examples to access
flow fields in an opaque manner.
Provides accessors for:
- is ipv4
- is ipv6
- ip protocol
- to server packet count
- to destination packet count
Ticket: #8632
To avoid back-and-forth of http1 conversion
a second query function was added to support
existing use cases.
This change will be handy for the upcoming
default-policy for firewall settings
This is required when rustc is not in a standard path. The other
cbindgen calls already had this, so it was just missed while adding the
ffi bindings, but shows up when rustc is at a path like
/usr/lib/rust-1.89/bin/rustc, but that directory is not in your path.
Disable the clippy warning for not using modern C string
literals. Ubuntu 24.04 still ships cbindgen 0.26.0 that doesn't
support these, so migrating to modern C string literals would require
Ubuntu 24.04 users wishing to build from git to install cbindgen with
cargo.
With this patch, the logged uuids will also have corresponding
stringified service names. The requests that will have an opnum will
have a corresponding stringified procedure name.
Feature 2727
Feature 8523
This data directly comes from Zeek @d11a8750. It was scriptually
converted to NDJSON ingestible to Suricata using serde and serde_json.
The script used for this conversion lives in
scripts/extract_dce_rpc_interfaces.py.
Part of this data within Zeek codebase comes from the MITRE BZAR
project. Hence, the LICENSE file alongwith this data consists of both
the licenses: Zeek and BZAR.
Feature 2727
Feature 8523
DOH2 depends on HTTP/2, so it makes no sense to enable it separately.
It would also put the sub state handling in a weird state, as the DOH2
side reuses the registered HTTP/2 callbacks.
Split into 2 sub-states:
- stream, which has the "HTTP" requests and responses, including DOH2
- global, which has the settings and other global or control handling
Introduce a simpler progress tracking for the global sub state:
- HTTP2ProgGlobalStart and HTTP2ProgGlobalComplete.
The stream sub state uses the same state machine as before.
Ticket: #8386.
Support for per transaction sub states: different state machines per
transaction type.
Skip engines not belonging to our substate.
Store tx_type in DetectTransaction.
Each protocol supporting sub states will register states from 1 and up.
To support:
Ticket: #8386.
Allow registration of per substate progress name mappings.
Implement logic for getting sub-state names, id's.
Add transaction type and end of progress values to AppLayerTxData.
Introduce helpers to keep logic clean.
Ticket: 8725
So that multiple HTTP2 DATA frames with EndOfStream flag set,
do not make the buffer grow, while processing it each time,
resulting in quadratic complexity
Ticket: 8629
When we are in async-oneside mode, we see only one direction
of the traffic, and should not wait for the other direction
before cleaning up a transaction.
new_tx() now refuses to create a transaction when the list is already at
SMB_MAX_TX, returning None instead of a transaction. Every creation path --
the new_*_tx helpers and their callers across smb1/smb2/dcerpc/session/
files/ioctl -- propagates that, so no single input can create more than the
limit, including a compound SMB2 request that chains many PDUs in one
record. When the list is full the parser puts the flow into an error state
and stops processing it.
This replaces the previous force-completion of old transactions, which did
not reliably bound the list and could leave transactions unreclaimable on
asymmetric flows. The now-unused tx_index_completed bookkeeping is removed.
Issue: 8629
Ticket: 8694
Otherwise, a flow full of small compression bombs is too slow
to process.
When the threshold is reached, decompression is skipped for the
rest of the flow.
Ticket: 8649
Fully resets all the fields before tackling an ecapsulated message
to avoid evasion, due to the encoding of the upper file
leaking into the next one...
Body lengths were stored as u16, so a SIP body of 65536 bytes truncated
body_len to 0 and the RequestBody/ResponseBody frame was never created,
letting body content evade inspection. Widen the framing fields to u32.
Ticket #8582
dcerpc parser creates a new tx with id 0 and compensates for the 1 based
index handling throughout the code by overriding that value in a trait
implementation. Make this consistent with other applayer parsers.
Task 8720
Tx ID handling did not take the required + 1 into account.
From a report:
RDP can skip cleanup because its id convention does not match the
generic Rust iterator. The generic iterator in applayer.rs returns
tx.id() - 1, and cleanup trusts that id when calling StateTransactionFree
in app-layer-parser.c. RDP registers that iterator in rdp.rs, but
RdpTransaction::id() returns the stored id unchanged in rdp.rs, while
free_tx also compares against the raw stored id in rdp.rs. For a single
freeable RDP tx with stored id 1, the iterator returns C id 0; cleanup
calls free_tx(0), nothing is removed, then has_next == false allows
min_id to advance to total_txs in app-layer-parser.c. That leaves the
tx live but now below min_id, so later cleanup will not revisit it.
This patch brings the handling in line with the other parsers.
Bug: #8717.
Mark the direction into RDP transactions at creation time,
so the tx carries SKIP_INSPECT for the direction it is
never seen in, matching DHCP and the other single-direction
parsers. This lets cleanup free completed transactions and
stops a tx from being inspected (and alerting) twice, once per
direction.
RDP bounds its transactions to connection setup and stops
parsing once bypass_parsing is set.
Issue: 8621
DHCP is a stateless parser where each datagram is its own standalone,
single-direction transaction. It was creating transactions with
AppLayerTxData::new(), which leaves both SKIP_INSPECT bits clear, so the
engine treats every tx as still needing inspection in both directions.
For a flow that only ever carries one direction (broadcast DHCP, or a
relay seeing one side), the never-observed direction's inspect bit can
never be set, so AppLayerParserTransactionsCleanup() never frees the tx.
The per-flow transaction Vec then grows without bound and every packet
re-scans the whole list, giving O(n^2) CPU and unbounded memory on a
busy DHCP aggregation point.
Use AppLayerTxData::for_direction() like every other stateless parser
(DNS, SNMP, NTP, IKE, KRB5, MQTT, QUIC, SIP, WebSocket, bittorrent-dht)
so the tx carries SKIP_INSPECT for the direction it will never be seen
in. This lets cleanup free completed transactions and also stops the tx
from being inspected (and alerting) twice, once per direction.
Issue: 8621
Ticket: 8659
If a client sends a SOTR/RETR command before doing a PASV/PORT
command, ther server may reply
425 Use PORT or PASV first.\r\n
and allow the client to continue sendinf other commands
So, Suricata should not put the whole flow into error, it just
sets an event, and continues to parse further
Extend the xor transform to accept a variable-position key using
the 'extract <nbytes> <offset>' syntax. The engine reads <nbytes> bytes
at buffer position <offset> at transform time.
The optional 'offset' parameter specifies where XOR decoding
starts in the buffer; bytes before that position are left unchanged.
Syntax:
xor:"<hex_key>"
xor:extract <nbytes> <offset>
xor:offset <N>,"<hex_key>"
xor:offset <N>,extract <nbytes> <offset>
Variable-key helpers (VariableKeyLocation, variable_key_bytes,
parse_key_location, strip_keyword_prefix) are imported from the new
varkey module.
The variable key bytes are copied out of the inspection buffer before
decoding, so an in-place transform cannot corrupt the key when the key
region overlaps the decoded range.
Issue: 8671
Introduce rust/src/detect/transforms/varkey.rs to centralise helpers
used by transforms that read key material directly from the inspection
buffer at transform time.
Exported items:
VariableKeyLocation { offset: u16, nbytes: u8 }
variable_key_bytes bounds-checked slice into an inspection buffer
strip_keyword_prefix strip 'keyword<ws>' from option strings
parse_key_location parse '<nbytes> <offset>' into VariableKeyLocation
All four items are pub so any transform can import them. Unit tests
are included in the module.
Issue: 8671
SIP and SSDP share method names like NOTIFY and SUBSCRIBE,
causing SSDP traffic to be misidentified as SIP.
Add a probing parser callback that checks for "SIP/" in the
payload before accepting a pattern match.
Example of a misidentified flow before the fix:
{"timestamp":"2014-02-27T19:44:43.164211+0100","flow_id":986757542077835,"event_type":"flow","src_ip":"192.168.1.1","src_port":9489,"dest_ip":"239.255.255.250
","dest_port":1900,"ip_v":4,"proto":"UDP","app_proto":"sip","flow":{"..."}}
After the fix:
{"timestamp":"2014-02-27T19:44:43.164211+0100","flow_id":986757542077835,"event_type":"flow","src_ip":"192.168.1.1","src_port":9489,"dest_ip":"239.255.255.250
","dest_port":1900,"ip_v":4,"proto":"UDP","app_proto":"failed","flow":{"..."}}
Ticket #8355
to deal with the failure due to cbindgen updates and mismatches in
generated bindings.
detect-bytemath.c:61: error: "DETECT_BYTEMATH_ENDIAN_DEFAULT" redefined [-Werror]
61 | #define DETECT_BYTEMATH_ENDIAN_DEFAULT (uint8_t) BigEndian
|
In file included from rust.h:34,
from detect-bytemath.c:32:
./../rust/gen/rust-bindings.h:5071: note: this is the location of the previous definition
5071 | #define DETECT_BYTEMATH_ENDIAN_DEFAULT BigEndian
|
At some point, bindgen include ordering changed such that
AppLayerGetFileState was being bindgen'd as opaque, as the definition of
StreamBufferingConfig was not available when bindgen hit
AppLayerGetFileState, and bindgen processes in order.
Move the util includes before the app-layer includes to fix the ordering
problem, but still keep util includes grouped.
The sys diff is large as many things have been re-ordered.
Per RFC 2132 the BOOTP sname and file fields can hold extra DHCP
options when option 52 is present, but the parser ignored them. After
parsing the main options we now look up option 52 and walk sname or
file as additional option streams, appending what we find to the same
options vector so the logger and detection keywords see the
overloaded values too.
Bug: #8538.
Ticket: 8518
Keywords that work for HTTP2 headers match now as soon as possible
A push promise is now considered like a headers frame with regards
to the progress (no dedicated "reserved" progress/state)
http.protocol and http.stat_msg keywords are now registered at
earliest progress, since these are synthetic like "HTTP/2" and
not really seen on the wire.
http.request_line and http.response_line match only on data,
and not on headers, since we must wait the end of headers
to be sure to have the full line
http2.size_update now matches at headers progress as it should
http2.frametype, http2.errorcode, http2.priority now match like
http2.window, when the tx is complete from both sides, as a
half-closed client may still send priority, rst_stream
or window_update frames
This adds an LLMNR protocol logger that reuses existing DNS functions,
following the same approach as the mDNS logger:
- No grouped logging
- Rdata is logged in a field that is named after the rdata type
- Types are logged in lower case
- Flags are logged as an array
Ticket #8366
This adds a parser for LLMNR protocol over both UDP and TCP.
The parser reuses the existing DNS functions since LLMNR shares
the same wire format as DNS, but implements its own protocol-specific
validation:
- LLMNR-specific flag checks (C, TC, T bits)
- Opcode validation (only standard query opcode 0 is valid)
- An Event is set if Z-flag is set, since it's must be zero per RFC4795
LLMNR transactions inherit DNS behavior where each packet creates a new state
with one transaction.
Ticket #8366
Ticket: 8513
Suricata decides at 2 levels if a http2 flow is doing a compression
bomb.
There is a direct computation when one chunk of TCP data
is being parsed.
In this case, do not take the ratio into account, just use the size
of the decompressed data, so that if we get a big chunk of TCP data
like 1 MiB, and a not so high ratio of 200, we do not trigger
the debug assertion in util-file.c about 64MiB
The other case stays unchanged : when accumulating over the lifetile of
a flow with multiple txs, take into account the compression ratio,
so that a flow of many txs, having a super high (brotli) compression
ratio, ends up classified as a compression bomb.
(For example, having 100 txs each turning a 100 byte input into a 700 KiB
one)
Ticket: 8513
During decompression, fail early if we have a big decompression
ratio, and enough data.
Track this data also during a tx lifetime, and even a flow/state
lifetime, so that we set event and fail also if the compression
bomb is split over multiple packets
Shivani Bhardwaj
Jason Ish
Philippe Antoine
Victor Julien
Jeff Lucovsky
Lukas Sismis
Giuseppe Longo
Jeff Lucovsky
William Ling
Samaresh Kumar Singh
Giuseppe Longo
Juliana Fajardini