Instead of the hardcode L4 matching in MPM that was recently introduced,
add an API similar to the AppLayer MPM and inspect engines.
Share part of the registration code with the AppLayer.
Implement for the tcp.hdr and udp.hdr keywords.
Fix and Optimize cleanup. For the simple single inspect buffer optimize
the cleanup by keeping track of the actually used buffers. This avoid
looping over unused buffers.
Fix the case of cleaning not being done after a tx if the next tx is
also inspected in the context of the same packet.
Fix cleanup of the multi-inspect buffers. Optimize in 2 ways. First
like with single keep track of which multi-inspect buffers have been
used. Second, keep a max of the buffers within a multi-inspect buffer.
Use this max to limit (nested) looping.
Set flags by default:
-Wmissing-prototypes
-Wmissing-declarations
-Wstrict-prototypes
-Wwrite-strings
-Wcast-align
-Wbad-function-cast
-Wformat-security
-Wno-format-nonliteral
-Wmissing-format-attribute
-funsigned-char
Fix minor compiler warnings for these new flags on gcc and clang.
The new Hyperscan 4.4 API provides a function to check for SSSE3
presence at runtime. This allows us to fall back to non-Hyperscan
matchers on systems without SSSE3 even when the suricata executable
is built with Hyperscan support. Addresses Redmine issue #2010.
Signed-off-by: Sascha Steinbiss <sascha@steinbiss.name>
Tested-by: Arturo Borrero Gonzalez <arturo@debian.org>
To be able to add a transaction counter we will need a ThreadVars
in the AppLayerParserParse function.
This function is massively used in unittests
and this result in an long commit.
app-layer.[ch], app-layer-detect-proto.[ch] and app-layer-parser.[ch].
Things addressed in this commit:
- Brings out a proper separation between protocol detection phase and the
parser phase.
- The dns app layer now is registered such that we don't use "dnstcp" and
"dnsudp" in the rules. A user who previously wrote a rule like this -
"alert dnstcp....." or
"alert dnsudp....."
would now have to use,
alert dns (ipproto:tcp;) or
alert udp (app-layer-protocol:dns;) or
alert ip (ipproto:udp; app-layer-protocol:dns;)
The same rules extend to other another such protocol, dcerpc.
- The app layer parser api now takes in the ipproto while registering
callbacks.
- The app inspection/detection engine also takes an ipproto.
- All app layer parser functions now take direction as STREAM_TOSERVER or
STREAM_TOCLIENT, as opposed to 0 or 1, which was taken by some of the
functions.
- FlowInitialize() and FlowRecycle() now resets proto to 0. This is
needed by unittests, which would try to clean the flow, and that would
call the api, AppLayerParserCleanupParserState(), which would try to
clean the app state, but the app layer now needs an ipproto to figure
out which api to internally call to clean the state, and if the ipproto
is 0, it would return without trying to clean the state.
- A lot of unittests are now updated where if they are using a flow and
they need to use the app layer, we would set a flow ipproto.
- The "app-layer" section in the yaml conf has also been updated as well.
Now we can specify alproto, ip_proto combinations this way
alert dns (ip_proto:[tcp/udp];)
alert ip (app-layer-protocol:dns;)
alert ip (app-layer-protocol:dns; ip_proto:tcp;)
alert tcp (app-layer-protocol:dns:)
so on. Neater than using dnstcp/dnsudp.
This is related to feature #424.
1. Proto detection
2. Parsers
For app layer protocols.
libhtp has now been moved to the section under app-layer.protocols.http,
but we still provide backward compatibility with older conf files.
Aho-Corasick mpm optimized for Tilera Tile-Gx architecture. Based on the
util-mpm-ac.c code base. The primary optimizations are:
1) Matching function used Tilera specific instructions.
2) Alphabet compression to reduce delta table size to increase cache
utilization and performance.
The basic observation is that not all 256 ASCII characters are used by
the set of multiple patterns in a group for which a DFA is
created. The first reason is that Suricata's pattern matching is
case-insensitive, so all uppercase characters are converted to
lowercase, leaving a hole of 26 characters in the
alphabet. Previously, this hole was simply left in the middle of the
alphabet and thus in the generated Next State (delta) tables.
A new, smaller, alphabet is created using a translation table of 256
bytes per mpm group. Previously, there was one global translation
table for converting upper case to lowercase.
Additional, unused characters are found by creating a histogram of all
the characters in all the patterns. Then all the characters with zero
counts are mapped to one character (0) in the new alphabet. Since
These characters appear in no pattern, they can all be mapped to a
single character and still result in the same matches being
found. Zero was chosen for the value in the new alphabet since this
"character" is more likely to appear in the input. The unused
character always results in the next state being state zero, but that
fact is not currently used by the code, since special casing takes
additional instructions.
The characters that do appear in some pattern are mapped to
consecutive characters in the new alphabet, starting at 1. This
results in a dense packing of next state values in the delta tables
and additionally can allow for a smaller number of columns in that
table, thus using less memory and better packing into the cache. The
size of the new alphabet is the number of used characters plus 1 for
the unused catch-all character.
The alphabet size is rounded up to the next larger power-of-2 so that
multiplication by the alphabet size can be done with a shift. It
might be possible to use a multiply instruction, so that the exact
alphabet size could be used, which would further reduce the size of
the delta tables, increase cache density and not require the
specialized search functions. The multiply would likely add 1 cycle to
the inner search loop.
Since the multiply by alphabet-size is cleverly merged with a mask
instruction (in the SINDEX macro), specialized versions of the
SCACSearch function are generated for alphabet sizes 256, 128, 64, 32
and 16. This is done by including the file util-mpm-ac-small.c
multiple times with a redefined SINDEX macro. A function pointer is
then stored in the mpm context for the search function. For alpha bit
sizes of 8 or smaller, the number of states usually small, so the DFA
is already very small, so there is little difference using the 16
state search function.
The SCACSearch function is also specialized by the size of the value
stored in the next state (delta) tables, either 16-bits or 32-bits.
This removes a conditional inside the Search function. That
conditional is only called once, but doesn't hurt to remove
it. 16-bits are used for up to 32K states, with the sign bit set for
states with matches.
Future optimization:
The state-has-match values is only needed per state, not per next
state, so checking the next-state sign bit could be replaced with
reading a different value, at the cost of an additional load, but
increasing the 16-bit next state span to 64K.
Since the order of the characters in the new alphabet doesn't matter,
the new alphabet could be sorted by the frequency of the characters in
the expected input stream for that multi-pattern matcher. This would
group more frequent characters into the same cache lines, thus
increasing the probability of reusing a cache-line.
All the next state values for each state live in their own set of
cache-lines. With power-of-two sizes alphabets, these don't overlap.
So either 32 or 16 character's next states are loaded in each cache
line load. If the alphabet size is not an exact power-of-2, then the
last cache-line is not completely full and up to 31*2 bytes of that
line could be wasted per state.
The next state table could be transposed, so that all the next states
for a specific character are stored sequentially, this could be better
if some characters, for example the unused character, are much more
frequent.
In debug validation mode, it is required to call application layer
parsing and other functions with a lock on flow. This patch updates
the code to do so.
Victor Julien
Jason Ish
Sascha Steinbiss
Giuseppe Longo
maxtors
Ken Steele
Anoop Saldanha
Eric Leblond