diff --git a/autojunk.sh b/autojunk.sh
index 6b4ac2e1d7..873c2d1612 100755
--- a/autojunk.sh
+++ b/autojunk.sh
@@ -1,6 +1,6 @@
 #!/bin/sh
 # the list of commands that need to run before we do a compile
-aclocal -I m4
+aclocal --force -I m4
 libtoolize --force --automake --copy
 autoheader
 automake --add-missing --copy
diff --git a/depcomp b/depcomp
index 4c20c6c944..df8eea7e4c 100755
--- a/depcomp
+++ b/depcomp
@@ -1,7 +1,10 @@
 #! /bin/sh
-
 # depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -14,9 +17,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -25,13 +26,45 @@
 
 # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
 
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
 fi
-# `libtool' can also be set to `yes' or `no'.
 
-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
@@ -52,12 +85,34 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -144,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -163,31 +218,43 @@ sgi)
 
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
-  # Also, the AIX compiler puts `$object:' at the start of each line;
-  # $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  outname="$stripped.o"
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
-
   stat=$?
+
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -198,11 +265,9 @@ aix)
   ;;
 
 icc)
-  # Must come before tru64.
-
-  # Intel's C compiler understands `-MD -MF file'.  However
+  # Intel's C compiler understands `-MD -MF file'.  However on
   #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # will fill foo.d with something like
+  # ICC 7.0 will fill foo.d with something like
   #    foo.o: sub/foo.c
   #    foo.o: sub/foo.h
   # which is wrong.  We want:
@@ -210,6 +275,12 @@ icc)
   #    sub/foo.o: sub/foo.h
   #    sub/foo.c:
   #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
 
   "$@" -MD -MF "$tmpdepfile"
   stat=$?
@@ -219,45 +290,115 @@ icc)
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h'.
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
   # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
-   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+   # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
    # dependencies in `foo.d' instead, so we check for that too.
    # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
-   tmpdepfile1="$object.d"
-   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
    if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
       "$@" -Wc,-MD
    else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
       "$@" -MD
    fi
 
    stat=$?
    if test $stat -eq 0; then :
    else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
       exit $stat
    fi
 
-   if test -f "$tmpdepfile1"; then
-      tmpdepfile="$tmpdepfile1"
-   else
-      tmpdepfile="$tmpdepfile2"
-   fi
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
    if test -f "$tmpdepfile"; then
       sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
-      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
    else
       echo "#dummy" > "$depfile"
    fi
@@ -270,34 +411,42 @@ tru64)
 
 dashmstdout)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  test -z "$dashmflag" && dashmflag=-M
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*) # this is libtool, let us make it quiet
-      for arg
-      do # cycle over the arguments
-        case "$arg" in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
       ;;
     esac
-    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
   tr ' ' '
@@ -315,36 +464,47 @@ dashXmstdout)
   ;;
 
 makedepend)
-  # X makedepend
-  (
-    shift
-    cleared=no
-    for arg in "$@"; do
-      case $cleared in no)
-        set ""; shift
-	cleared=yes
-      esac
-      case "$arg" in
-        -D*|-I*)
-	  set fnord "$@" "$arg"; shift;;
-	-*)
-	  ;;
-	*)
-	  set fnord "$@" "$arg"; shift;;
-      esac
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
     done
-    obj_suffix="`echo $object | sed 's/^.*\././'`"
-    touch "$tmpdepfile"
-    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tail +3 "$tmpdepfile" | tr ' ' '
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
 ' | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
@@ -354,35 +514,40 @@ makedepend)
 
 cpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
       ;;
     esac
-    "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
     sed '$ s: \\$::' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -392,42 +557,56 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
       ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
     esac
-    "$@" -E |
-    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -439,3 +618,13 @@ none)
 esac
 
 exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/htp/INSTALL b/htp/INSTALL
index d3c5b40a94..2550dab752 100644
--- a/htp/INSTALL
+++ b/htp/INSTALL
@@ -2,15 +2,15 @@ Installation Instructions
 *************************
 
 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
-This file is free documentation; the Free Software Foundation gives
+   This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-Briefly, the shell commands `./configure; make; make install' should
+   Briefly, the shell commands `./configure; make; make install' should
 configure, build, and install this package.  The following
 more-detailed instructions are generic; see the `README' file for
 instructions specific to this package.
@@ -73,9 +73,9 @@ The simplest way to compile this package is:
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ -88,7 +88,7 @@ is an example:
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
@@ -100,10 +100,24 @@ architecture at a time in the source code directory.  After you have
 installed the package for one architecture, use `make distclean' before
 reconfiguring for another architecture.
 
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
 Installation Names
 ==================
 
-By default, `make install' installs the package's commands under
+   By default, `make install' installs the package's commands under
 `/usr/local/bin', include files under `/usr/local/include', etc.  You
 can specify an installation prefix other than `/usr/local' by giving
 `configure' the option `--prefix=PREFIX'.
@@ -126,7 +140,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 Optional Features
 =================
 
-Some packages pay attention to `--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -138,14 +152,46 @@ find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -153,7 +199,8 @@ type, such as `sun4', or a canonical name which has the form:
 
 where SYSTEM can have one of these forms:
 
-     OS KERNEL-OS
+     OS
+     KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
@@ -171,9 +218,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -182,7 +229,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -201,11 +248,19 @@ an Autoconf bug.  Until the bug is fixed you can use this workaround:
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'
-     Print a summary of the options to `configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
 
 `--version'
 `-V'
@@ -232,6 +287,16 @@ an Autoconf bug.  Until the bug is fixed you can use this workaround:
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *Note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
 
diff --git a/install-sh b/install-sh
index a5897de6ea..6781b987bd 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-12-25.00
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -515,5 +515,6 @@ done
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/missing b/missing
index 6a37006e8f..28055d2ae6 100755
--- a/missing
+++ b/missing
@@ -1,6 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -14,9 +18,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -29,6 +31,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -38,18 +42,24 @@ else
   configure_ac=configure.in
 fi
 
-case "$1" in
+msg="missing on your system"
+
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
   shift
   "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
   ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -67,6 +77,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -74,11 +85,18 @@ Supported PROGRAM values:
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
   tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -87,42 +105,69 @@ Supported PROGRAM values:
     exit 1
     ;;
 
-  aclocal*)
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar*)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
     fi
+    ;;
+esac
 
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
     touch aclocal.m4
     ;;
 
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autoconf*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
     touch configure
     ;;
 
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autoheader*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
@@ -130,7 +175,7 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -140,13 +185,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
@@ -155,21 +195,16 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  autom4te*)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -183,111 +218,108 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
+  help2man*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
+  makeinfo*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
@@ -300,13 +332,13 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -323,10 +355,10 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
 
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
+         it often tells you about the needed prerequisites for installing
          this package.  You may also peek at any GNU archive site, in case
          some other package would contain this missing \`$1' program."
     exit 1
@@ -334,3 +366,11 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/mkinstalldirs b/mkinstalldirs
index d2d5f21b61..4191a45dbd 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -1,21 +1,36 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+
+scriptversion=2009-04-28.21; # UTC
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
 # Created: 1993-05-16
-# Public domain
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
 
+nl='
+'
+IFS=" ""	$nl"
 errstatus=0
-dirmode=""
+dirmode=
 
 usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
 
 # process command line arguments
 while test $# -gt 0 ; do
   case $1 in
     -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
+      echo "$usage"
+      exit $?
       ;;
     -m)                         # -m PERM arg
       shift
@@ -23,6 +38,10 @@ while test $# -gt 0 ; do
       dirmode=$1
       shift
       ;;
+    --version)
+      echo "$0 $scriptversion"
+      exit $?
+      ;;
     --)                         # stop option processing
       shift
       break
@@ -50,30 +69,58 @@ case $# in
   0) exit 0 ;;
 esac
 
+# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error.  This is a problem when calling mkinstalldirs
+# from a parallel make.  We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
 case $dirmode in
   '')
-    if mkdir -p -- . 2>/dev/null; then
+    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
       echo "mkdir -p -- $*"
       exec mkdir -p -- "$@"
+    else
+      # On NextStep and OpenStep, the `mkdir' command does not
+      # recognize any option.  It will interpret all options as
+      # directories to create, and then abort because `.' already
+      # exists.
+      test -d ./-p && rmdir ./-p
+      test -d ./--version && rmdir ./--version
     fi
     ;;
   *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+       test ! -d ./--version; then
       echo "mkdir -m $dirmode -p -- $*"
       exec mkdir -m "$dirmode" -p -- "$@"
+    else
+      # Clean up after NextStep and OpenStep mkdir.
+      for d in ./-m ./-p ./--version "./$dirmode";
+      do
+        test -d $d && rmdir $d
+      done
     fi
     ;;
 esac
 
 for file
 do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
   shift
+  IFS=$oIFS
 
-  pathcomp=
   for d
   do
-    pathcomp="$pathcomp$d"
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
     case $pathcomp in
       -*) pathcomp=./$pathcomp ;;
     esac
@@ -84,21 +131,21 @@ do
       mkdir "$pathcomp" || lasterr=$?
 
       if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
+	errstatus=$lasterr
       else
-  	if test ! -z "$dirmode"; then
+	if test ! -z "$dirmode"; then
 	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+	  lasterr=
+	  chmod "$dirmode" "$pathcomp" || lasterr=$?
 
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
+	  if test ! -z "$lasterr"; then
+	    errstatus=$lasterr
+	  fi
+	fi
       fi
     fi
 
-    pathcomp="$pathcomp/"
+    pathcomp=$pathcomp/
   done
 done
 
@@ -107,5 +154,9 @@ exit $errstatus
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
-# mkinstalldirs ends here